Safety instructions

Please be very cautious during any interaction with the printer. This printer is an electrical device with moving parts and hot-temperature areas.

1. Device is for indoor use only. Do not expose the printer to rain or snow. Always keep the printer in a dry environment at a minimum distance of 30 cm from other objects.

2. Always place the printer on a stable place, where it can not fall or tip over.

3. The printer supply is household power outlet 230 VAC, 50 Hz or 110 VAC / 60 Hz; Never connect the printer to a different power supply, it may cause malfunction or damage to the printer.

4. Place the power cord so you can’t stumble on it, or step on it or otherwise expose to any damage. Make sure that the power cord is not mechanically or otherwise damaged. Stop using damaged cable immediately and replace it.

5. When you disconnect the power cord from the socket, pull the plug rather than the cord to reduce the risk of damage to plug or AC outlet.

6. Never disassemble the printer power supply, it does not contain any parts that could be repaired by unskilled worker. All repairs must be provided by a qualified technician.

7. Do not touch the nozzle or heat bed when the printer is printing or is warming up. Note that the temperature of the nozzle is 210-260 °C; heatbed temperature can reach over 100 °C. Temperatures above 40 °C can cause harm to human body.

8. Prevent children from unsupervised access to the printer even when the printer is not printing.