10.6 Flex

Flex is a very strong and flexible material suitable especially for the flexible prototypes, covers, etc. Important: Before you start printing from Flex, clean the nozzle from the previous material - preheat the nozzle and load PLA to remove any other previous material. When loading Flex, loosen the extruder screws. Keep in mind that when printing from Flex, automatic filament exchange function may not work properly.

• Nozzle temperature: 230 °C
• Bed temperature: 50 °C. You can set the bed temperature up to 65 °C depending the size of an object. (larger object means higher temperature)
• Heatbed: Put one layer of the glue on the glass before every print. The glue is applied only before the first print or in case you cleaned the glass completely.